Study on Mechanical Properties of Pineapple Leaf-Glass Fiber Hybrid Composites for Car Body Applications

Sutrisno; Sudarno; Wahidin Nuriana; Koharudin Koharudin

doi:10.37367/jrtt.v2i2.30

Authors

Sutrisno Department of Mechanical Engineering, Universitas Merdeka Madiun
Sudarno Department of Mechanical Engineering, Universitas Merdeka Madiun
Wahidin Nuriana Department of Mechanical Engineering, Universitas Merdeka Madiun
Koharudin Koharudin Student in Department of Mechanical Engineering, Universitas Merdeka, Madiun

DOI:

https://doi.org/10.37367/jrtt.v2i2.30

Keywords:

Glass fiber, Pineapple leaf fiber, Epoxy resin, Hand lay-up, Random fiber, Horizontal fiber

Abstract

The purpose of this study was to determine the mechanical properties of glass fiber composites and fiber, orientation and variations pineapple with a different composition of the main tarik.Bahan tests used are glass fiber, pineapple fiber, lye (NaOH), epoxy resin and hardener. Specimens composites made by the method of hand lay up with variations in the composition of the glass fiber 6%: pineapple fiber 4%, the glass fiber 9%: pineapple fiber 6%, glass fibers 12%: pineapple fiber 8%, glass fibers 15%: pineapple fiber 10% and with random fiber orientation and horizontal. Making the specimens was performed by reference to standard ASTM D 638.Hasil this test shows that the highest tensile strength in horizontal fiber orientation with the volume fraction of 25% sebesar143.98 MPa, while the lowest occurred in a random fiber orientation of 10% amounting to 13.45 MPa. Fault Composite glass fiber and epoxy pineapple fiber bermatrik average can be classified as a single fracture type.

References

Hussein Maher Saad Hayder, Hamed Afrasiab, Meghdad Gholami, 2023. Efficient generation of random fiber distribution by combining random sequential expansion and particle swarm optimization algorithms, Vol. 173.

Kurniasih, P., W.A. Wirawan, A. Narto, O.S. Pribadi, N.A. Imron, N.F. Rachman, and A. Pradipta. 2023. ‘Flammability and Morphology of Agel Leaf Fibre- Epoxy Composite Modified with Carbon Powder for Fishing Boat Applications’. Archives of Materials Science and Engineering 122 (1): 13–21. https://doi.org/10.5604/01.3001.0053.8842.

M. N. Sakib and A. . Asif Iqba, “Epoxy Based Nanocomposite Material for Automotive Application- A Short Review”, Int. J. Automot. Mech. Eng., vol. 18, no. 3, pp. 9127–9140, Oct. 2021.

Weiwei Wang, Han Wang, Shaohua Fei, Haijin Wang, Huiyue Dong, Yinglin Ke, 2021. Generation of random fiber distributions in fiber reinforced composites based on Delaunay triangulation, Vol. 206, August 2021, 109812

Gibson, F. R. 1994. Principle of Composite Material Mechanics, McGraw-Hill Inc New York.

Radzi, A.M., Sheikh Ahmad Zaki, Mohamad Zaki Hassan, R.A. Ilyas, Khairur Rijal Jamaludin, Mohd Yusof Md Daud, and Sa’ardin Abd Aziz. 2022. "Bamboo-Fiber-Reinforced Thermoset and Thermoplastic Polymer Composites: A Review of Properties, Fabrication, and Potential Applications" Polymers 14, no. 7: 1387. https://doi.org/10.3390/polym14071387

W. A. Wirawan, M. A. Choiron, E. Siswanto, and T. Dwi, ‘Analysis of the fracture area of tensile test for natural woven fiber composites ( hibiscus tiliaceus-polyester ) Analysis of the fracture area of tensile test for natural woven fiber composites ( hibiscus tiliaceus-polyester )’, 2020, doi: 10.1088/1742-6596/1700/1/012034.

Chao Zhu, Ping Zhu, Wei Tao, 2017. Numerical investigation of fiber random distribution on the mechanical properties of yarn in-plain woven carbon fiber-reinforced composite based on a new perturbation algorithm, Volume 52, Issue 6, doi.org/10.1177/00219983177148.

B. W. Budiarto, W. A. Wirawan, F. Rozaq, N. F. Rachman, and D. S. Oktaria, “Effect of fiber length on tensile strength, impact toughness, and flexural strength of Banana Stem Fiber (BSF)-polyester composite for train body”, JEMMME, vol. 8, no. 1, pp. 7–14, Aug. 2023

Jones R.M. 1975.Mechanics of Composite Materials. Washington DC, Scripta Book Company.

J. Merson, R.C. Picu, 2020. Size effects in random fiber networks controlled by the use of generalized boundary conditions. Volume 206, doi.org/10.1016/j.ijsolstr.2020.09.033.

Wirawan, Willy Artha, Moch Agus Choiron, Eko Siswanto, and Teguh Dwi Widodo. 2022. ‘Morphology, Structure, and Mechanical Properties of New Natural Cellulose Fiber Reinforcement from Waru (Hibiscus Tiliaceus) Bark’. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2060402.

M. Muslimin et al., ‘The Effect of Liquid Smoke Treatment on Physical Stability and Impact Toughness Chicken Feather Fibre ( CFF ) as Reinforcement in Composites’, vol. 52, no. 6, pp. 1845–1854, 2023.

W. A. Wirawan, A. Sabitah, M. A. Choiron, M. Muslimin, A. Zulkarnain, and B. W. Budiarto, ‘Effect of chemical treatment on the physical and thermal stabillity of Hibiscus Tiliaceus Bark Fiber (HBF) as reinforcement in composite’, Results Eng., vol. 18, no. March, 2023, doi:10.1016/j.rineng.2023.101101.

M. Safavi, S.S. Nourazar, M. Safavi, S.S. 2019. Experimental, analytical, and numerical study of droplet impact on a horizontal fiber, Volume 113, doi.org/10.1016/j.ijmultiphaseflow.2018.10.018.

W. A. Wirawan, ‘Surface Modification with Silane Coupling Agent on Tensile Properties of Natural Fiber Composite’, J. Energy, Mech. Mater. Manuf. Eng., vol. 2, no. 2, pp. 98–105, 2017, doi: 10.22219/jemmme.v2i2.5053.

Schwartz M. H.,1984, Composite Material Handbook, McGraw Hill, New York. MacMillan Publishing Company, New York, USA.

Billy Putra Novanda, Haris Ardianto, Hery Setiawan, 2022. Impact Strength Of Horizontal Bamboo Fiber And Iron Sand With Epoxy Matrix. Vol 8, No. 1.

W. Wirawan, T. Widodo, A. Zulkarnain, Analysis of the Addition of Coupling Agent on the Tensile Properties of Waru (Hibiscus Tiliaceus)-Polyester Leather Biocomposite, Jurnal Rekayasa Mesin 9/1 (2018) 35-41 (in Indonesian). DOI: https://doi.org/10.21776/ub.jrm.2018.009.01.6.

Hariyanto, Agus., 2009. Effect of Volume Fraction of Kenaf Fiber Composite and Rayon Fiber with Polyester Matrix on Tensile and Impact Strength. Science & Technology Research Journal, Vol. 10, No. 2 (in Indonesia).

M. A. Fentahun and M. A. Savas, “Materials used in automotive manufacture and material selection using ashby charts,” Int.J. Mater. Eng., vol. 8, no. 3, pp. 40–54, 2018, doi: 10.5923/j.ijme.20180803.02.